Cermet Rods

  • Cermet Rods h5 h6 for end mills reamers high tolerance round rods

    Cermet Rods h5 h6 for end mills reamers high tolerance round rods

    Cermet rods from diameter 3mm to 20mm available

    Ti(CN) based cermet is a composite material that combines ceramic and metallic materials. Cermet grades are used in continuous machining of cold/hot forged steel and Sintered ferrous alloy at high speed and low depth of cut.
    Typical application of our cermet inserts are finishing and semi-finishing machining in carbon steel, 45# steel, gray cast Iron, alloyed steels, etc.

  • Cermet Rods 310-330mm for End Mills Reamers Long Tools Life

    Cermet Rods 310-330mm for End Mills Reamers Long Tools Life

    Cermet rods from diameter 3mm to 20mm available

    Ti(CN) based cermet is a composite of TiC and nickel. Ti(C,N) adds wear resistance to the grade, the second hard phase increases the plastic deformation resistance and the amount of cobalt controls the toughness. Compared to cemented carbide, cermet has improved wear resistance and reduced smearing tendencies. On the other hand, it also has lower compressive strength and inferior thermal shock resistance. Cermets can also be PVD coated for improved wear resistance.